EasyManuals Logo

Brother MFC-J3520 Quick Setup Guide

Brother MFC-J3520
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
34
For Wireless Network Users
Troubleshooting
How can I find the wireless security information (SSID and Network Key*)
* The Network Key may also be described as the Password, Security Key or Encryption Key.
Wireless LAN report
If the wireless LAN report that printed shows that the connection failed, check the error code on the printed report
and refer to the following instructions.
If you need assistance during setup and want to contact Brother Customer Service, make sure you
have your SSID (Network Name) and Network Key ready. We cannot assist you in locating this
information.
1) Check the documentation provided with your wireless access point/router.
2) The initial SSID could be the manufacturer’s name or the model name.
3) If you do not know the security information, please consult the router manufacturer, your system
administrator, or your Internet provider.
Error code Recommended Solutions
TS-01
The wireless setting is not activated, turn the wireless setting to ON.
- If a network cable is connected to your machine, disconnect it and turn the wireless setting
of your machine to ON.
On your machine, press (Settings).
Press All Settings.
Press a or b to display Network.
Press Network.
Press a or b to display Network I/F.
Press Network I/F.
Press WLAN.
Press .
TS-02
The wireless access point/router cannot be detected.
1. Check the following 4 points.
- Make sure that the wireless access point/router is powered on.
- Move your machine to an obstruction-free area, or closer to the wireless access
point/router.
- Temporarily place your machine within about one metre from the wireless access point
when you are configuring the wireless settings.
- If your wireless access point/router is using MAC address filtering, confirm the MAC
address of the Brother machine is allowed in the filter.
2. If you manually entered the SSID and security information (SSID/authentication
method/encryption method/Network Key), the information may be incorrect.
Reconfirm the SSID and security information and re-enter the correct information as
necessary. See How can I find the wireless security information (SSID and Network Key*)
on page 34 to confirm.

Other manuals for Brother MFC-J3520

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-J3520 and is the answer not in the manual?

Brother MFC-J3520 Specifications

General IconGeneral
Print TechnologyInkjet
Duplex PrintingYes
Fax Modem Speed33.6 kbps
FunctionsPrint, Copy, Scan, Fax
Standard Paper Capacity250 sheets
Mobile PrintingYes
Max Print Resolution6000 x 1200 dpi
Scanner TypeFlatbed + ADF
Max Scan Resolution1200 x 2400 dpi
ConnectivityUSB, Ethernet, Wi-Fi
Automatic Document Feeder (ADF)Yes
Ink CartridgesBlack, Cyan, Magenta, Yellow
Print Speed (Black)Up to 35 ppm (draft), 12 ppm (ISO)
Print Speed (Color)27 ppm
Display2.7" Touchscreen Color LCD

Related product manuals