Brother MFC-J625DW - Machine Information; Checking the Serial Number; Reset Functions; How to Reset the Machine

94
Machine Information B
Checking the serial number B
You can see the machine’s serial number on
the LCD.
a Press Menu.
b Press s or t to display
Machine Info.
c Press Machine Info.
d Press Serial No.
e Press Stop/Exit.
Reset functions B
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings, such as the
password and IP address information.
2 Speed Dial&Fax
Speed Dial & Fax resets the following
settings:
 Speed Dial
(Speed-Dial and Setup Groups)
 Programmed fax jobs in the memory
(Polled Transmit, Delayed Fax and
Delayed Batch Transmission)
 Station ID
(Name and Number)
 Remote Fax Options
(Fax Forwarding)
 Report settings
(Transmission Verification Report,
Quick Dial List and Fax Journal)
 History
(Caller ID history and Outgoing Call)
 Faxes in memory
3 All Settings
You can restore all settings to their factory
defaults.
Brother strongly recommends performing
this procedure before handing over or
disposing of the machine.
How to reset the machine B
a Press Menu.
b Press s or t to display
Initial Setup.
c Press Initial Setup.
d Press s or t to display Reset.
e Press Reset.
f Press s or t to display the Reset
options Network, Speed Dial&Fax
or All Settings.
g Press the option you want to reset.
h Press Yes to confirm.
i Press Yes for 2 seconds to reboot the
machine.