Brother MFC-J625DW - Making Copies; Basic Copy Operations and Settings

54
8
How to copy 8
The following steps show the basic copy
operation.
a Make sure you are in copy mode, press
(COPY).
 The LCD shows:
1 No. of Copies
You can enter the number of copies by
pressing - or + on the screen (as shown
above).
Note
The default setting is FAX mode. You can
change the amount of time that the
machine stays in COPY mode after the
last copy operation.
(uuAdvanced User’s Guide: Mode Timer
(MFC models only))
b Do one of the following to load your
document:
 Place the document face down in the
ADF.
(See Using the ADF uu page 28.)
 Place the document face down on
the scanner glass.
(See Using the scanner glass
uu page 29.)
c If you want more than one copy, enter
the number (up to 99).
d Press Mono Start or Colour Start.
Stop copying 8
To stop copying, press Stop/Exit.
Copy settings 8
You can change the following copy settings.
Press COPY and then press Options. Press
s or t to scroll through the copy settings.
When the setting you want is displayed, press
it and choose your option.
(Basic User’s Guide)
For details about changing the following copy
settings uu page 55.
 Paper Type
 Paper Size
(Advanced User’s Guide)
For details about changing the following copy
settings
uuAdvanced User’s Guide: Copy settings
 Quality
 Enlarge/Reduce
 Page Layout
 2in1(ID)
 Stack/Sort
 Density
 Duplex Copy
 Set New Default
 Factory Reset
Note
If you want to sort copies, use the ADF.
Making copies 8
1