Brother MFC-J625DW - Volume and LCD Display Settings

Chapter 1
12
Volume Settings 1
Ring Volume 1
You can choose a range of ring volume
levels, from High to Off. The machine will
keep your new default setting until you
change it.
Setting the Ring Volume from the
menu
1
a Press Menu.
b Press s or t to display
General Setup.
c Press General Setup.
d Press s or t to display Volume.
e Press Volume.
f Press s or t to display Ring.
g Press Ring.
h Press Low, Med, High or Off.
i Press Stop/Exit.
Beeper Volume 1
When the beeper is on, the machine will beep
when you press a key, make a mistake, or
after you send or receive a fax.
You can choose a range of beeper volume
levels, from High to Off.
a Press Menu.
b Press s or t to display
General Setup.
c Press General Setup.
d Press s or t to display Volume.
e Press Volume.
f Press s or t to display Beeper.
g Press Beeper.
h Press Low, Med, High or Off.
i Press Stop/Exit.
Speaker Volume 1
You can choose a range of speaker volume
levels, from High to Off.
a Press Menu.
b Press s or t to display
General Setup.
c Press General Setup.
d Press s or t to display Volume.
e Press Volume.
f Press s or t to display Speaker.
g Press Speaker.
h Press Low, Med, High or Off.
i Press Stop/Exit.