Brother MFC-J625DW - Basic Operations and Settings Customization

General information
9
1
Status LED 1
When you turn the machine on, the status
LED lights up.
When the memory card or USB Flash
memory drive is being read or written to, the
status LED blinks.
When the machine is in Sleep Mode, the
status LED will be off.
Basic Operations 1
To operate the Touchscreen, use your finger
to press the Menu or option button directly on
the Touchscreen. To display and access all
the screen menus or options in a setting,
press s or t to scroll through them.
The following steps show how to change a
setting in the machine. In this example the
Receive mode setting is changed from
Fax Only to Fax/Tel.
a Press Menu.
b Press s or t to display
Initial Setup.
c Press Initial Setup.
d Press s or t to display
Receive Mode.
e Press Receive Mode.
f Press s or t to display Fax/Tel.
g Press Fax/Tel.
Note
Press to go back to the previous level.
h Press Stop/Exit.