Menu and features
117
C
Entering Text C
When you are setting certain menu selections, you may need to enter text into the machine.
Press to cycle between letters, numbers and special characters. Up to four letters are assigned
to each letter button on the LCD. By pressing the correct button repeatedly, you can access the
character you want.
Inserting spaces C
To enter a space, press to choose special characters, then press the space button or .
Or, you can press the c twice to move the cursor.
The characters available may differ depending on your country.
Making corrections C
If you entered an incorrect character and want to change it, press d to move the cursor under the
incorrect character. Then press . Enter the correct character. You can also insert letters by
moving the cursor and entering a character.
If the screen does not show a d button, press repeatedly until you have erased the incorrect
character. Enter the correct characters.
Repeating letters C
If you need to enter a character that is on the same button as the letter before it, press c to move
the cursor to the right before you press the same button again.
To Next Page
Loading...
