Chapter 10
90
g Choose the settings for
ADF High Speed Mode, Scan Type,
Resolution, File Type,
Scan Size, Scan Long Paper,
File Name, Auto Crop and
Remove Background Colour as
required.
• If you chose colour in the scan type
setting, you cannot choose the file type
TIFF.
• If you chose monochrome in the scan type
setting, you cannot choose the file type
JPEG.
• Scan Long Paper is available only
when using the ADF.
• Remove Background Colour
removes the base colour of documents to
make the scanned data more
recognisable.
h The file name is set automatically.
However, you can create a name of your
choice using the keyboard on the
Touchscreen. Press File Name, and
then enter the file name. You can only
change the first 6 digits of the file name.
Press OK.
i Press OK.
If you want to save the settings as a
shortcut, press Save as Shortcut.
j Press Start.
If you are using the scanner glass, the
Touchscreen shows Next page?.
Press Yes or No. After you finish
scanning, make sure you choose No
before removing the memory card or
USB Flash drive from the machine.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
