Chapter 2
28
If you have problems printing on
envelopes with the flap on the short edge,
try the following:
2
a Open the envelope flap.
b Put the envelope into paper tray #1 with
the address side down and the flap
positioned as shown in the illustration.
c Select Reverse Print (Windows
®
) or
Reverse page orientation (Macintosh)
in the printer driver’s dialog box, and
then adjust the size and margin in your
application.
(See Software and Network User’s
Guide.)
Loading paper in paper
tray #2 (MFC-J3720/
MFC-J6720DW)
2
You can only use plain paper sizes A4 or
Letter (in Landscape position) and A3,
Legal or Ledger (in Portrait position) in
tray #2.
a Pull the paper tray completely out of the
machine.
To Next Page
Loading...
