Brother MFC-J6520DW

Settings and feature tables
157
C
Network
(Continued)
Wi-Fi Direct
(Continued)
Manual ——You can
manually
configure your
Wi-Fi Direct™
network
settings.
See .
Group Owner — On
Off*
Sets your
machine as the
Group Owner.
Device
Information
Device Name — You can see the
device name of
your machine.
SSID — Shows SSID of
Group Owner.
When the
machine is not
connected,
Touchscreen
shows
Not Connected .
IP Address — You can see the
current IP
address of your
machine.
Status
Information
Status G/O Active
(**)
Client Active
Not Connected
Off
** = the number
of devices
You can see the
current Wi-Fi
Direct™
network status.
Signal Strong
Medium
Weak
None
You can see the
current Wi-Fi
Direct™
network signal
strength. When
your machine
acts as Group
Owner, the
Touchscreen
always shows
Strong.
I/F Enable — On
Off*
Enable or
Disable the
Wi-Fi Direct™
connection.
Level1 Level2 Level3 Level4 Options Descriptions Page
See Software and Network User’s Guide.
Please go to the Brother Solutions Center to download the Wi-Fi Direct™ Guide at http://solutions.brother.com/
.
Please go to the Brother Solutions Center to download the Web Connect Guide at http://solutions.brother.com/
.
The default settings are shown in Bold with an asterisk.