2-20
Confidential
Jam Inside Open the Front Cover,
pull out the Drum Unit
completely and
remove the jammed
paper.
The eject sensor does not detect
paper pass after the registration
rear sensor detected the paper
pass.
7000 2-44
Jam Rear Open the Back Cover
and remove the
jammed paper, then
press Start.
The eject sensor remains ON
(paper pass detected) even after
the registration rear sensor
detected the end of paper pass.
7100 2-45
Jam Tray Remove the jammed
paper from Tray.
When printing from the paper tray,
the registration front sensor does
not detect paper pass within the
specified time after the paper feed
sensor detected paper pass.
7300 2-45
Machine Error **
-
A machine error occurred.
Refer to the error code “**”.
--- ---
Manual Feed Load paper. There is no paper set in the manual
feed slot on the manual feed slot fix
mode.
8C00 2-48
No Access Point
-
Cannot connect to access point.
--- 4.5.2
No Paper Load paper. When printing from the paper tray,
the paper feed sensor detected
that there was no paper set in the
paper tray.
9302 2-49
No Toner Open the Front Cover,
then install the Toner
Cartridge.
The new toner sensor detected
that the toner cartridge was not set. 6101 2-41
Out of Memory Press Stop Key. There is insufficient memory to
expand PC print data.
C700 2-55
Print Data Full Print Data is full. Press
Stop and delete the
previously stored data.
The memory size allotted for
Secure print was exceeded when
saving Secure print data.
C800 2-55
Print Unable ** Printing error
Refer to the error code “**”.
--- ---
Replace Drum
-
The number of rotations of the
drum unit has reached the upper
limit. (Printing does not stop.)
4200 2-38
Replace Toner Open the Front Cover,
replace Toner
Cartridge.
Dot count or develop roller counter of
the toner has reached the upper limit
in the toner stop mode.
4C01 2-39
-
Dot count or develop roller counter of
the toner has reached the upper limit
in the toner continuous printing
mode.
4D01 2-39
Scan Unable ** Scanning error
Refer to the error code “**”.
--- ---
Error Messages
Description
Error
codes
Refer
to:
Upper line Lower line
To Next Page
Loading...
Need help?
General
Weight and Dimensions
