Telephone and external devices
59
7
Recording an outgoing
message (OGM) 7
a Record 5 seconds of silence at the
beginning of your message. This allows
your machine time to listen for fax tones.
b Limit your speaking to 20 seconds.
c End your 20-second message by giving
your Remote Activation code for people
sending manual faxes. For example:
“After the beep, leave a message or
press l51 (l91 for New Zealand) and
Start to send a fax.”
• You must turn the Remote Codes setting
to On to use the Remote Activation code
l51 (l91 for New Zealand) (see Using
Remote Codes on page 61).
• We recommend beginning your OGM with
an initial 5 second silence because the
machine cannot hear the fax tones over a
loud voice. You may try leaving out this
pause, but if your machine has trouble
receiving faxes, then you should re-record
the OGM to include it.
Multi-line connections (PABX)7
Most offices use a central telephone system.
Brother recommends that all our Fax/MFC
machines be connected to a discreet
(dedicated) line. Although a particular PABX
may appear to work with a particular model of
fax machine, we cannot guarantee that the
unit will operate correctly.
While it is often relatively simple to connect a
fax machine to a PABX (Private Automatic
Branch Exchange), we suggest that you
contact the company that installed your
telephone system and ask them to connect
the fax machine for you.
Brother does not recommend the use of a
PABX line. PABX limitations in general can
cause some functions of the fax machine not
to work correctly.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
