Chapter 7
60
External and extension
telephones 7
You must turn the Remote Codes setting
to on to use the Remote Activation Code
l51 and Remote Deactivation Code #51
(For New Zealand: Remote Activation
Code l91 and Remote Deactivation Code
#91, see Using Remote Codes
on page 61).
Connecting an external or
extension telephone 7
You can connect a separate telephone
directly to your machine as shown in the
diagram below.
1 Extension telephone
2 External telephone
3 Protective Cap
Operation from external or
extension telephones 7
If you answer a fax call on an extension
telephone, or an external telephone that is
correctly connected to the machine through
the T-piece connection, you can make your
machine take the call by using the Remote
Activation code. When you press the Remote
Activation code l51 (l91 for New Zealand)
the machine starts to receive the fax.
If you answer a call and no one is on the line:
You should assume that you’re receiving a
manual fax.
Press l51 (l91 for New Zealand) and wait for
the chirp or until the Touchscreen shows
Receiving, and then hang up.
You can also use the Fax Detect feature to
make your machine automatically take the
call (see Fax Detect on page 47).
For Fax/Tel mode only 7
When the machine is in Fax/Tel mode, it will
use the F/T Ring Time (fast double-ringing) to
alert you to pick up a voice call.
Lift the external telephone’s handset, and
then press Pickup to answer.
If you are at an extension telephone, you will
need to lift the handset during the F/T Ring
Time and then press #51 (#91 for New
Zealand) between the fast double-rings. If no
one is on the line, or if someone wants to
send you a fax, send the call back to the
machine by pressing l51 (l91 for New
Zealand).
1
3
2
(Example
for
Australia)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
