Brother MFC MFC-250C - Canceling Broadcast in Progress; Sending Faxes Using Multiple Settings

Chapter 5
28
Canceling a Broadcast in
progress 5
a Press Menu, 2, 4.
The LCD will show the Broadcast job
number followed by the fax number (or
name) being dialed (for example, #001
0123456789).
b Press OK.
The LCD will show the following
message:
#001 0123456789
1.Clear 2.Exit
c Press 1 to cancel the fax number being
dialed.
The LCD will then show the following
messages:
Broadcast#001
1.Clear 2.Exit
d Press 1 to cancel the Broadcast.
e Press Stop/Exit.
Additional sending
operations
5
Sending faxes using multiple
settings 5
When you send a fax you can choose any
combination of these settings: resolution,
contrast, scan size, overseas mode and real
time transmission.
a Make sure you are in Fax mode .
b Load your document.
c Choose a setting you want to change in
the Setup Send menu (Menu, 2, 2).
Press OK.
d Choose the option you want for the
setting.
Press OK.
e Do one of the following:
Other Settings
1.Yes 2.No
 Press 1 to change another setting.
 Press 2 when you have finished
choosing your settings.
f Send the fax as normal.