Brother MFC MFC-250C User Manual

Chapter 5
32
Sending a fax at the end of a
conversation 5
At the end of a conversation you can send a
fax to the other party before you both hang
up.
a Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b Make sure you are in Fax mode .
c Load your document.
d Press Black Start or Color Start.
 If you load the document on the
scanner glass, press 1 to send the
fax.
1.Send 2.Receive
e Replace the handset of an external
telephone.
Out of Memory message 5
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Black Start or
Color Start to send the pages scanned so
far, or to press Stop/Exit to cancel the
operation.
Note
If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 30.)

Brother MFC MFC-250C Specifications

General

PC Faxing	Yes
Standard Media Capacity	100 sheets
Output Tray Capacity	50 sheets
Display	LCD
Functions	Copier, Fax, Printer, Scanner
Printing Technology	Inkjet
Scanner Type	Flatbed
Media Type	Plain paper, envelopes, transparencies
Connectivity Technology	USB
Operating System Support	Mac
Max Printing Resolution	Up to 6000 x 1200 dpi (color)