Brother MFC MFC-5440CN - Printing Images

WALK-UP PHOTOCAPTURE CENTER
™
(MFC-5840CN ONLY) 9 - 6
Printing images
Before you can print an individual image, you have to know the
image number.
1
Make sure you have inserted the media card.
Press
PhotoCapture
. (See page 9-3.)
2
Press
▲
or
▼
to choose
Print Images
.
Press
Menu/Set
.
3
Use the dial pad to enter the image
number that you want to print from
the Index page (Thumbnails).
Press
Menu/Set
.
Repeat this step until you have entered all the image numbers
that you want to print.
4
After you have selected all the image numbers,
press
Menu/Set
again, and go to Step 5.
—OR—
If you have finished choosing settings, press
Colour Start
.
Print the Index first.
(See
Printing the Index (Thumbnails)
on page 9-5.)
If your media card contains valid DPOF information, the LCD
shows
DPOF Print:Yes
, please go to DPOF printing on page
9-8.
You can enter all the numbers at one time by using the key for
a comma or the
#
key for hyphen.
(For example, Enter
136
- to print images No.1, No.3 and
No.6. Enter
1#5
to print images No.1 to No.5).
Enter & Set Key
No.:1,3,6