GLOSSARY G - 1
G
ADF (automatic document feeder) The document can be placed
in the ADF and scanned one page at a time automatically.
Auto Reduction Reduces the size of incoming faxes.
Automatic fax transmission Sending a fax without picking up the
handset of an external phone.
Automatic Redial A feature that enables your MFC to redial the last
fax number after five minutes if the fax did not go through because
the line was busy.
Backup Print Your MFC prints a copy of every fax that is received
and stored in memory.
This is a safety feature so you will not lose messages during a
power failure.
Batch Transmission (Black and white faxes only) As a cost saving
feature, all delayed faxes to the same fax number will be sent as
one transmission.
Brightness Changing the Brightness makes the whole image
lighter or darker.
Beeper Volume Volume setting for the beep when you press a key
or make an error.
Broadcasting The ability to send the same fax message to more
than one location.
Cancel Job Cancels a programmed job, like Delayed Fax or
Polling.
CNG tones The special tones (beeps) sent by fax machines during
automatic transmission to tell the receiving machine that a fax
machine is calling.
Coding method Method of coding the information contained in the
document. All fax machines must use a minimum standard of
Modified Huffman (MH). Your MFC is capable of greater
compression methods, Modified Read (MR), Modified Modified
Read (MMR) and JPEG, if the receiving machine has the same
capability.
Glossary
To Next Page
Loading...
Need help?
General
