G - 2 GLOSSARY
Communication error (or Comm. Error) An error during fax
sending or receiving, usually caused by line noise or static.
Compatibility group The ability of one fax unit to communicate
with another. Compatibility is assured between ITU-T Groups.
Contrast Setting to compensate for dark or light documents, by
making faxes or copies of dark documents lighter and light
documents darker.
Colour Enhancement Adjusts the colour in the image for better
print quality by improving sharpness, white balance and colour
density.
Delayed Fax Sends your fax at a specified later time that day.
Dual Access Your MFC can scan outgoing faxes or scheduled jobs
into memory at the same time it is sending a fax or receiving or
printing an incoming fax.
ECM (Error Correction Mode) Detects errors during fax
transmission and resends the pages of the fax that had an error.
Extension phone A telephone on the fax number that is plugged
into a separate wall socket.
External phone A TAD (telephone answering device) or telephone
that is connected to your MFC.
F/T Ring Time The length of time that the Brother MFC rings (when
the Receive Mode setting is Fax/Tel) to notify you to pick up a
voice call that it answered.
Fax Detect Enables your MFC to respond to CNG tones if you
interrupt a fax call by answering it.
Fax Forwarding Sends a fax received into the memory to another
pre-programmed fax number.
Fax Journal Lists information about the last 200 incoming and
outgoing faxes. TX means Transmit. RX means Receive.
Fax Receive Code Press this code (
5
1
) when you answer a fax
call on an extension or external phone.
Fax Storage You can store faxes in memory.
Fax tones The signals sent by sending and receiving fax machines
while communicating information.
To Next Page
Loading...
Need help?
General
