3 - 3 SETUP SEND
How to Fax (B&W and Colour)
Colour fax transmission
Your MFC can send a colour fax to machines that support this
feature.
However, colour faxes cannot be stored in the memory. When you
send a colour fax, the MFC will send it in real time (even if
Real
Time TX
is set to
Off
).
Faxing from the ADF
Put the document face up in the ADF. To cancel, press
Stop/Exit
.
1
If it is not illuminated in green, press (
Fax
).
2
Load your document.
3
Dial the fax number.
Press
Mono Start
or
Colour Start
. The MFC starts scanning
the first page.
Delayed fax and Polling Transmit features are not available in
colour.
If the memory is full and you are faxing a single page, it will be
sent in real time.
To Next Page
Loading...
