Brother MFC MFC-5440CN - Setting up Groups for Broadcasting

QUICK-DIAL NUMBERS AND DIALLING OPTIONS 5 - 3
Setting up Groups for Broadcasting
Groups allow you to send the same fax message to many fax
numbers by pressing only a few keys (
Search/Speed Dial
,
#
, the
two-digit number, and
Mono Start
). First, you’ll need to store each
fax number as a Speed-Dial number.
Then, you can combine them into a Group. Each Group uses up a
Speed-Dial number. You can have up to six Groups, or you can
assign up to 39 numbers (MFC-5440CN) or up to 99 numbers
(MFC-5840CN) to one large Group.
(See Storing Speed-Dial numbers on page 5-1 and Broadcasting
(Not available for colour faxes) on page 3-11.)
1
Press
Menu/Set
,
2
,
3
,
2
.
2
Use the dial pad to enter the
two-digit Speed-Dial number where
you want to store the Group.
Press
Menu/Set
.
(For example, press
07
and
Menu/Set
.)
3
Use the dial pad to enter the Group
number (1 to 6).
Press
Menu/Set
.
(For example, press
1
for Group 1.)
4
To include Speed-Dial numbers in
the Group, press them as follows:
For example, for Speed-Dial
numbers 05 and 09. Press
Search/Speed Dial
,
05
,
Search/Speed Dial
,
09
. The LCD shows:
#05#09
.
The Group number must be between 1 and 6.
Set Quick-Dial
2.Setup Groups
Setup Groups
Speed-Dial? #
Setup Groups
Setup Group:G01
Setup Groups
G01:#05#09