102
0.Initial Setup
1.Date&Time 1.Date&Ti me — Adds the date and time to
the LCD and in the
headings of the faxes you
send.
58
2.Auto Daylight
On
Off*
Change this setting to On
if you want the machine to
change automatically for
Daylight Saving Time.
See .
2.Station ID — Fax:
Name:
Enter your name and fax
number to appear on
each page you fax.
See .
3.Tone/Pulse — Tone*
Pulse
Choose the dialing mode.
4.Dial Tone — Detection
No Detection*
You can shorten the dial
tone detect pause.
91
5. Compatibility
— Normal*
Basic(for VoIP)
Adjusts the modem speed
to help resolve
transmission problems.
91
6.Reset
1.Machine Reset
1.Reset 2.Exit
You can reset the
machine’s settings, such
as the Date and Time,
and Ring Delay.
92
2.Network
1.Reset 2.Exit
Resets the print server
back to the factory
defaults, such as the
password and IP address
information.
3.Address&Fax
1.Reset 2.Exit
Deletes all stored
Speed Dial numbers and
faxes, restores the
Station ID, Address Book
List, Transmission
Verification Report and
Fax Journal back to the
factory settings.
4.All Settings 1.Reset 2.Exit
Resets all the machine’s
settings back to the
factory settings.
0.Local Language
(depending on
your country)
— (Choose the
language you
want to use)
Allows you to change the
LCD language.
See .
Level1 Level2 Level3 Options Descriptions Page
See Advanced User’s Guide.
See Quick Setup Guide.
The factory settings are shown in Bold with an asterisk.
To Next Page
Loading...
