4-29
Confidential
(9) Signal isolation
(10)Video signal reception
* Available in German models only
Code 1 Code 2 Causes
90 01 Unable to detect video signals and commands within 6 seconds
after CFR is transmitted.
90 02 Received PPS containing invalid page count or block count.
Code 1 Code 2 Causes
A0 03
Error correction sequence not terminated even at the final
transmission speed for fallback.
A0 11 Receive buffer empty. (5-second time-out)
A0 12
Receive buffer full during operation except receiving into
memory.
A0 13 Decoding error continued on 500 lines.
A0 14 Decoding error continued for 10 seconds.
A0 15 Time-out: 13 seconds or more for one-line transmission.
A0 16 RTC not found and carrier OFF signal detected for 6 seconds.
A0 17 RTC found but no command detected for 60 seconds.
AA 18 Receive buffer full during receiving into memory.
A0 19 No video data to be sent.
A0 20
Unable to continue to receive color FAX. (Remaining ink
insufficient)
A8 01 RTN, PIN, or ERR received at the calling terminal.*
A9 01 RTN, PIN, or ERR received at the called terminal.*
To Next Page
Loading...
