Brother MFC5890CN - List of Maintenance-Mode Functions

9-2
Confidential
9.2 LIST OF MAINTENANCE-MODE FUNCTIONS
Maintenance-mode Functions
Function
Code
Function
Reference Section
(Page)
01
EEPROM Parameter Initialization 9.4.1 (9-4)
05
Printout of Scanning Compensation Data 9.4.2 (9-5)
08
ADF Performance Test 9.4.3 (9-7)
09
Test Pattern 9.4.4 (9-8)
10
Firmware Switch Setting 9.4.5 (9-10)
11
Printout of Firmware Switch Data 9.4.5 (9-13)
12
Operational Check of LCD and Specifying of the LCD Type 9.4.6 (9-15)
13
Operational Check of Control Panel PCB (Check of Keys) 9.4.7 (9-17)
28
Updating of Firmware Using an External Memory 9.4.8 (9-18)
32
Sensor Operational Check 9.4.9 (9-19)
37
Printout of Dial Log 9.4.10 (9-20)
46
Backup of Machine Information 9.4.11 (9-21)
52
Setting of Country/Language 9.4.12 (9-23)
53
Transfer of Received FAX Data and/or Equipment's Log 9.4.13 (9-24)
54
Fine Adjustment of Scanning Start/End Position 9.4.14 (9-26)
55
Acquisition of White Level Data and CIS Scanner Area Setting 9.4.15 (9-27)
58
Updating of Paper Feeding Correction Value 9.4.16 (9-28)
59
Checking of CIS Travel and Specifying of CIS Type 9.4.17 (9-32)
63
Travel Check of the Head/Carriage Unit and Initial Setup Mode 9.4.18 (9-34)
65
Alignment of Vertical Print Lines in Monochrome 9.4.19 (9-35)
66
Margin Adjustment in Borderless Printing 9.4.20 (9-38)
68
Updating of Property Data 9.4.21 (9-43)
69
Head/Carriage Unit Traveling Speed Check 9.4.22 (9-44)
74
EEPROM Customizing 9.4.23 (9-45)
75
Travel of Head/Carriage Unit (for removing paper particles and dust
accumulated on the maintenance unit)
9.4.24 (9-46)
76
Purge Operation 9.4.25 (9-47)
77
Print of the Equipment’s Log 9.4.26 (9-50)
80
Display of the Equipment's Log 9.4.27 (9-52)
82
Equipment Error Code Indication 9.4.28 (9-54)
87
Output of Transmission Log to the Telephone Line 9.4.29 (9-54)
88
Assurance Mode Switch Setting 9.4.30 (9-55)
91
EEPROM Parameter Initialization (except the telephone number storage area) 9.4.1 (9-4)
99
Exit from the Maintenance Mode ------ (9-1)
(Menu + #, 2,
7, 9, 0, 0)
Cancellation of the Pin TX Lock Mode (Not applicable to Japanese and
U.S.A. models)
9.4.31 (9-65)
: A function that the end user can use. (Refer to Section 9.3.)