Brother MFC5890CN - Disassembly of ADF & Document Cover ASSY

6-14
Confidential
6.1.4 Disassembly of ADF & Document Cover ASSY
Brother emblem, document support, and document stopper
(1) Remove the brother emblem from the upper ADF chute.
Note: Remove the brother emblem only when it should be replaced. Once removed, it will
become unusable and a new one will have to be put back in.
(2) Open the document support, warp it slightly, and remove its front and rear bosses from the
holes provided in the upper ADF chute.
(3) Remove the document stopper.
ADF cover
(4) Open the ADF cover, warp it slightly, and remove it from the front and rear bosses
provided on the upper ADF chute.
Grounding wire
ADF motor harness
Document sensor
PCB harness
Upper ADF chute
ADF & documen
t
cover ASSY
Document
stopper
Boss
Document support
Boss
(6_11)
Emblem
Upper ADF chute
ADF cover
Document cover
ADF rear cover
Hinge
Boss
Boss
(6_12)