Brother MFC5890CN - 10 ] Adjustments;Data in the Memories

4-51
Confidential
[ 10 ] Adjustments/data in the memories
Adjustment/data
setting error in the
following
components:
Result Refer to:
Error
codes
EEPROM customizing
code
- The machine will not work as specified
for that model or that shipping
destination.
- Chapter 9, Section
9.4.23
- Appendix 3
ID code - The machine will not be able to be
identified by the PC connected to it via
USB.
- Chapter 7, Section
7.3, [ 9 ]
Head property data (in
the EEPROM)
- The print quality will deteriorate. - Chapter 7, Section
7.2, [ 1 ]
- Chapter 9, Section
9.4.21
Correction of head
positioning error
- Any of the following images may appear
on the printout:
- Chapter 7, Section
7.2, [ 4 ]
Updating of the paper
feeding correction
value for the paper feed
roller/paper ejection
roller (Function code
58)
- Any of the following images may appear
on the printout:
- Chapter 7, Section
7.2, [ 5 ]
- Chapter 9, Section
9.4.16
Setting of the CIS
scanner area
- The white and black level data will not
be compensated properly.
- The scanning center position will not be
centered.
- The enlargement/reduction ratio of
copies will go wrong.
- Chapter 9, Section
9.4.15
Alignment of vertical
print lines
- The following image may appear on the
printout:
- Chapter 7, Section
7.2, [ 6 ]
- Chapter 9, Section
9.4.19