Confidential
Appendix 2. Firmware Installation
This appendix provides instructions on how to change firmware stored in the flash ROM on the main
PCB or load firmware to a new main PCB from the host PC.
A2.1 Loading the Programs to the Flash ROM ...............................................................App. 2-1
[ 1 ] Preparation...................................................................................................App. 2-1
[ 2 ] Installing the Brother Maintenance USB Printer driver.................................App. 2-1
[ 3 ] Loading the programs onto the flash ROM of the machine..........................App. 2-5
[3.1] If the main PCB is replaced with a new one........................................App. 2-5
[3.2] If the main PCB loaded with programs is used
(Updating existing programs) ..............................................................App. 2-7
To load programs from the PC .........................................................App. 2-7
To load programs using an external memory...................................App. 2-8
To Next Page
Loading...
