6-34
Confidential
(12)Place the upper cover upside down.
(13)Remove the MJ side cover from the upper cover.
(14)Release the rear end and the loop of the encoder guard spring from the spring guide and
boss on the upper cover, respectively.
(15)Unhook the encoder guard spring from the encoder guard film.
(16)Slide the film inwards, turn it to the front by 90°, and release the opposite end (no spring)
of the film from the boss on the upper cover.
MJ side cover
Upper cover
(placed upside down)
(6_35)
(6_36)
Upper cover
(placed upside down)
Encoder guard film
Encoder guard spring
Spring guides
Encoder guard film
(Front)
(Front)
Boss
Boss
Square hole
To Next Page
Loading...
