Brother MFC5890CN - Page 244

6-89
Confidential
 Paper pull-in idle gear and paper pull-in roller L
Apply a 3 mm diameter ball of grease (Molykote EM-30LP) to the lubrication point on the
paper pull-in idle gear as shown below. After applying the grease at the center of a gear teeth,
rotate the gear until the lubrication point is hidden by the adjacent gear, taking care not to touch
the paper pull-in rollers.
Apply a 1 mm diameter ball of grease (Molykote EM-30LP) to the lubrication points on the
paper pull-in roller L as shown below.
ASF idle gear holder
ASF gear shaft outer
(6_76_r1)
Paper pull-in roller R
Paper pull-in gear
Paper pull-in roller L
Paper pull-in
roller R
Paper pull-in
gear
Paper pull-in roller L
Engine unit
(placed upside down)
(Front)
Pawl
Paper pull-in idle gear
Apply grease here.
Apply grease here.
Apply grease here.