Brother MFC5890CN - Page 247

Confidential
[ 11 ] Update the paper feeding correction value (Function code 58) ........7-32
[ 12 ] Align vertical print lines (Function code 65) ......................................7-32
[ 13 ] Adjust margins in borderless printing (Function code 66).................7-32
[ 14 ] Print out an ADF copy chart and make a copy of that chart
in ADF scanning................................................................................7-32
[ 15 ] Check LCD operation and specify the LCD type
(Function code 12) ............................................................................7-32
[ 16 ] Get EEPROM data (incl. MAC address) from the WLAN PCB
(For wireless LAN-enabled model)....................................................7-32
[ 17 ] Switch back to standby .....................................................................7-32
7.4 IF YOU REPLACE THE ADF UNIT OR ADF-RELATED PARTS ...........................7-33
[ 1 ] Check the "Total Quality Check Pattern"...........................................7-33
[ 2 ] Print out an ADF copy chart and make a copy of that chart
in ADF scanning................................................................................7-33
7.5 IF YOU REPLACE THE INK ABSORBER BOX OR FLUSHING BOX...................7-36
[ 1 ] Reset each of the purge and flushing counters.................................7-36
7.6 IF YOU REPLACE THE CONTROL PANEL ASSY OR CONTROL PANEL PCB..7-37
[ 1 ] Check LCD operation and specify the LCD type
(Function code 12) ............................................................................7-37
[ 2 ] Check the operation of the control panel PCB (Function code 13)...7-37
7.7 IF YOU REPLACE THE SCANNER COVER (SCANNER UNIT)...........................7-37
[ 1 ] Specify the CIS Type (Function code 59)..........................................7-37
[ 2 ] Acquire white level data and set CIS scanner area
(Function code 55) ............................................................................7-37
[ 3 ] Check the "Total Quality Check Pattern"...........................................7-37
[ 4 ] Print out an ADF copy chart and make a copy of that chart
in ADF scanning................................................................................7-37
7.8 IF YOU REPLACE THE WLAN PCB
(FOR WIRELESS LAN-ENABLED MODEL) ..........................................................7-37
[ 1 ] Transfer EEPROM data (incl. MAC address) to the main PCB.........7-37