Brother MFC5890CN - Page 356

9-64
Confidential
• Selectors 7 and 8: Reduction of banding in borderless printing (Limit of the number of head
nozzles to be used)
Enabling this function limits the number of head nozzles to be used in borderless printing
to reduce banding.
The default is "0, 0" for models with movable platen and "1, 1" for other models.
Users’ problems and requests
Enable head-platen gap offset
(for desired target paper and borderless
printing)
Combination
pattern of
AMS02 and
AMS05
settings
Stains on any type of paper. Enable for any type of paper (in any size).
(8)
Minor stains acceptable in printing with
borderless printing disabled.
But not acceptable with borderless
printing enabled.
Enable only when borderless printing is
enabled.
Stains on any type of paper. Enable for any type of paper (in any size).
(9)
Stains not acceptable, regardless of
borderless printing setting.
Enable regardless of borderless printing
setting.
Stains on A3, B4, or ledger sized plain
paper.
Enable for A3, B4, and ledger plain paper.
(10)
Minor stains acceptable, rather than
taking longer print time with borderless
printing enabled.
Enable only when borderless printing is
disabled.
Stains on A3, B4, or ledger sized plain
paper.
Enable for A3, B4, and ledger plain paper.
(11)
Minor stains acceptable in printing with
borderless printing disabled. But not
acceptable with borderless printing
enabled.
Enable only when borderless printing is
enabled.
Stains on A3, B4, or ledger sized plain
paper.
Enable for A3, B4, and ledger plain paper.
(12)
Stains not acceptable, regardless of
borderless printing setting.
Enable regardless of whether borderless
printing setting.