Brother MFC5890CN - Page 380

App. 4-6
Confidential
WSW03 (PBX* mode setting)
sec.: second(s), ms: millisecond(s)
* PBX: Private branch exchange
Note: Selectors 2 through 4, 6 and 7 are not applicable where no PBX is installed.
• Selectors 1 and 5: CNG detection when sharing a modular wall socket with a telephone
These selectors determine whether or not the machine detects a CNG signal when a line is
connected to a telephone sharing a modular wall socket with the machine. Upon detection
of CNG signals by the number of cycles specified by these selectors, the machine interprets
CNG as an effective signal and then starts FAX reception.
• Selectors 2 through 4: Detection time length of PBX dial tone, required for starting dialing
(Not used.)
Upon detection of the PBX dial tone for the time length specified by these selectors, the
machine starts dialing.
These selectors are effective only when both selectors 6 and 7 are set to "1" (Detection).
Selector
No.
Function Setting and Specifications
1
CNG detection when sharing a
modular wall socket with a
telephone
0: A 1: B
2
|
4
Detection time length of PBX*
dial tone, required for starting
dialing
(Not used.)
No.234
000 :50 ms
0 0 1 : 210 ms
0 1 0 : 500 ms
0 1 1 : 800 ms
1 0 0 : 900 ms
101 :1.5 sec.
110 :2.0 sec.
111 :2.5 sec.
5
CNG detection when sharing a
modular wall socket with a
telephone
0: A 1: B
6
7
Dial tone detection in PBX*
(Not used.)
No. 6 7
0 0 : No detection
(3.5 sec. WAIT)
0 1 : No detection
(5 sec. WAIT)
1 0 : No detection
(7 sec. WAIT)
1 1 : Detection
(Frequency only)
8 Not used.
Selector
No. 1 No. 5
Cycle
0 (A) 0 (A)
0 (A) 1 (B)
1 (B) 0 (A)
1 (B) 1 (B)
0.5 cycle
1.0 cycle
1.5 cycles
2.0 cycles