Brother MFCJ4340DWE - Send a Fax Manually

Home > Fax > Send a Fax > Send a Fax Manually
Send a Fax Manually
Manual fax transmission lets you hear the dialling, ringing and fax-receiving tones while sending a fax.
>> MFC-J4340DW
>> MFC-J4440DW/MFC-J4540DW
MFC-J4340DW
(Not available in South Africa)
1. Load your document.
2. Press
(FAX).
3. Press Hook and listen for a dial tone.
4. Enter the fax number.
5. When you hear fax tones, press Mono Start or Colour Start.
If you are using the scanner glass, press c to send a fax.
(For South Africa only)
To send a fax manually, do the following:
Load your document. To listen for a dial tone, pick up the handset of the external telephone. Dial the fax number
using the external telephone. When you hear fax tones, press Mono Start or Colour Start. If you are using the
scanner glass, press c to send a fax.. Replace the handset of the external phone.
MFC-J4440DW/MFC-J4540DW
(Not available in South Africa)
1. Load your document.
2. Press
[Fax].
If [Fax Preview] is set to [On], press [Fax] > [Sending Faxes].
3. Press [Hook] and listen for a dial tone.
4. Enter the fax number.
5. When you hear fax tones, press [Fax Start].
If using the scanner glass, press [Send].
(For South Africa only)
To send a fax manually, do the following:
Load your document. To listen for a dial tone, pick up the handset of the external telephone. Dial the fax number
using the external telephone. When you hear fax tones, press
and then press [Fax Start]. If you are
using the scanner glass, press [Send]. Replace the handset of the external phone.
Related Information
• Send a Fax
182