Brother MFCJ4340DWE - Change for Daylight Saving Time Manually

Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change
for Daylight Saving Time Manually
Change for Daylight Saving Time Manually
You can program the machine to change for Daylight Saving Time.
When selecting [Forward Hour] it will forward the time by an hour and backward one hour when selecting
[Backward Hour]. Make sure you have set the correct date and time in the [Date & Time] setting.
This feature is available only in some countries.
>> MFC-J4340DW
>> MFC-J4440DW/MFC-J4540DW
MFC-J4340DW
1. Press Settings.
2. Press a or b to make your selections:
a. Select [Initial Setup]. Press OK.
b. Select [Date & Time]. Press OK.
c. Select [Daylight Save]. Press OK.
d. Select [Forward Hour] or [Backward Hour]. Press OK.
3. Press Stop/Exit.
MFC-J4440DW/MFC-J4540DW
1. Press [Settings].
2. Press [Date & Time] > [Daylight Save].
3. Press [Forward Hour] or [Backward Hour].
4. Press .
Related Information
• General Settings
559