Brother MFCJ4340DWE - Change How Long the LCD Backlight Stays On

Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Change
How Long the LCD Backlight Stays On
Change How Long the LCD Backlight Stays On
Set how long the LCD backlight stays on.
>> MFC-J4340DW
>> MFC-J4440DW/MFC-J4540DW
MFC-J4340DW
1. Press Settings.
2. Press a or b to make your selections:
a. Select [General Setup]. Press OK.
b. Select [LCD Settings]. Press OK.
c. Select [Dim Timer]. Press OK.
d. Select [10 Secs], [30 Secs], [1 Min], [2 Mins], [3 Mins], or [5 Mins]. Press OK.
3. Press Stop/Exit.
MFC-J4440DW/MFC-J4540DW
1. Press [Settings] > [All Settings] > [General Setup] > [LCD Settings] > [Dim
Timer].
2. Press a or b to display the [10 Secs], [30 Secs], [1 Min], [2 Mins], [3 Mins], or [5 Mins]
option, and then press the option you want.
3. Press .
Related Information
• General Settings
566