Brother MFCJ4340DWE - Set the TX Lock Password

Home > Security > Lock the Machine Settings from the Control Panel > About Using TX Lock > Set the TX
Lock Password
Set the TX Lock Password
Related Models: MFC-J4340DW
1. Press Settings.
2. Press a or b to select the following:
a. Select [Fax]. Press OK.
b. Select [Miscellaneous]. Press OK.
c. Select [TX Lock]. Press OK.
3. Enter a four-digit number for the password. Press OK.
4. Re-enter the password. Press OK.
5. Press Stop/Exit.
Related Information
• About Using TX Lock
403