Brother MFCJ4340DWE - Adjust the LCD Backlight Brightness

Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Adjust
the LCD Backlight Brightness
Adjust the LCD Backlight Brightness
If you are having difficulty reading the LCD, changing the brightness setting may help.
>> MFC-J4340DW
>> MFC-J4440DW/MFC-J4540DW
MFC-J4340DW
1. Press Settings.
2. Press a or b to make your selections:
a. Select [General Setup]. Press OK.
b. Select [LCD Settings]. Press OK.
c. Select [Backlight]. Press OK.
d. Select [Light], [Med], or [Dark]. Press OK.
3. Press Stop/Exit.
MFC-J4440DW/MFC-J4540DW
1. Press [Settings] > [All Settings] > [General Setup] > [LCD Settings] >
[Backlight].
2. Press the [Light], [Med], or [Dark] option.
3. Press
.
Related Information
• General Settings
565