Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set
Tone or Pulse Dialling Mode
Set Tone or Pulse Dialling Mode
Your machine is set for a Tone dialling service. If you have a Pulse dialling (rotary) service, you must change the
dialling mode.
This feature is not available in some countries.
>> MFC-J4340DW
>> MFC-J4440DW/MFC-J4540DW
MFC-J4340DW
1. Press Settings.
2. Press a or b to make your selections:
a. Select [Initial Setup]. Press OK.
b. Select [Tone/Pulse]. Press OK.
c. Select [Tone] or [Pulse]. Press OK.
3. Press Stop/Exit.
MFC-J4440DW/MFC-J4540DW
1. Press [Settings] > [All Settings] > [Initial Setup] > [Tone/Pulse].
2. Press [Tone] or [Pulse].
3. Press .
Related Information
• General Settings
Related Topics:
• Telephone and Fax Problems
568
To Next Page
Loading...
