III - 33
(2) Set the cassette PCB ASSY to the upper cover, and hang the hook of the upper
cover on the cassette PCB ASSY.
(3) Secure the cassette PCB ASSY to the upper cover with the screw.
NOTE: When wiring, pass the lead wires through the guides as shown the below figure.
Figure 3.1-37 Installing the Cassette PCB ASSY
Cassette PCB ASSY
Guides
Guides
Guides
Hook
Main PCB ASSY
Upper cover
Battery
terminal 2730
Screw
To Next Page
Loading...
