Brother P-Touch PT-2730 - Inspect Cassette Sensor Switch Mode ([3] Key)

III - 53
3.3.2 Inspect cassette sensor switch mode ([3] key)
- Press the below key, and the “Figure 3.3-11” will be displayed.
* Europe/North America specifications: [3]
Figure 3.3-11
Outline of “inspect cassette sensor switch mode”
- Check the pressing of the seven sensor switches (cassette sensor 1, 2. 3,
4, 5, 6 and the cover sensor).
- Press the 1, 2. 3, 4, 5, 6 and the cover sensor in this order.
- Press the sensor by itself. If press the sensor with others, the NG is judged.
- The position of the cassette sensor is as shown below.
- Press the below key in the middle of the inspection (“Figure 3.3-12” to “Figure
3.3-18”), and the “Figure 3.3-11” will be displayed.
* Europe/North America specifications: [OK] / [ENTER]
Press the below key from the state of “Figure 3.3-11”, and the “Figure 3.3-12” will be
displayed.
* Europe/North America specifications: [OK] / [ENTER]
Figure 3.3-12
CASSETTE
123
4
5
6
C
Cover senso
r
CASSETTE 1