What does 'Invalid!' mean on my Brother Label Maker?
If your Brother Label Maker displays 'Invalid!', it means that an invalid number was entered as the label length, tab length, cable diameter, flag length or faceplate length. It can also mean that an invalid letter or number to be incremented was selected in the Serialize function.
What does 'Text Full!' mean on my Brother P-touch PT-E110 Label Maker?
If your Brother Label Maker displays 'Text Full!', it means that you have reached the maximum number of characters allowed (80 characters for text).
Why does my Brother P-touch PT-E110 say 'Wrong Tape!'?
If your Brother Label Maker displays 'Wrong Tape! Use TZe tape', make sure to use a cassette with the mark or mark.
What does 'No Text!' mean on my Brother Label Maker?
If your Brother Label Maker displays 'No Text!', it means you tried to print a text file when there is no data stored in the memory. It can also mean that a button is pressed when no text is entered, or a button was pressed when no text was entered while using templates.
Why does my Brother P-touch PT-E110 display 'Cutter Pressed'?
If your Brother Label Maker displays 'Cutter Pressed', it means that the Tape Cutter Lever was pressed in the middle of the printing process.
General| Model | PT-E110 |
|---|---|
| Category | Label Maker |
| Print Resolution | 180 dpi |
| Maximum Tape Width | 12 mm |
| Keyboard Type | QWERTY |
| Display | LCD |
| Cutter Type | Manual |
| Print Speed | 20 mm/sec |
| Tape Sizes | 3.5mm, 6mm, 9mm, 12mm |
| Number of Fonts | 1 |
| Built-in Symbols | 200 |
| Multi-Block Printing | No |
| Memory | No |
| Print Method | Thermal Transfer |
| Tape Type | TZe tape |
| Font Styles | Normal, Outline, Shadow |
| Max. Label Length | 300 mm |
| Weight | 400 g (without batteries) |
| Power Source | 6 x AAA batteries (LR03/HR03) (not included) |
Instructions for installing power supply and tape cassette.
How to enter characters and spaces for labels.
How to print the displayed text on a label.
How to create labels for wrapping around cables.
How to create flag-style labels for cables.
How to create evenly spaced labels for components.
Steps to reset the labeling system to default settings.
Lists common error messages and their causes/remedies.
Solutions for common operational issues and display problems.
To Next Page