Brother QL-710W - Completing Wireless Installation: Windows; WPS Configuration and Driver Installation

25
8
When using "Method 1:
Configuration using the
Installer CD-ROM and
temporarily using a USB
cable", choose Yes, I have
a USB cable to use for
installation, and then click
[Next]. Go to 9-1. When
using "Method 2: One push
configuration using WPS
and configuration using the
Installer CD-ROM", choose
No, I do not have a USB
cable, and then click [Next].
Go to 9-2.
If the Important Notice
screen appears, read the
notice. Check the box after
you confirm the SSID and
Network Key, and then click
[Next].
Go to
9-1. Go to 9-2.
For Method 1 users
9-1
Temporarily connect the
USB cable directly to the
computer and the printer.
10-1
Do one of the following:
• If the Installation confirmation
screen appears, check the box
and click [Next], then go to
11-1.
• Otherwise, go to 12-1.
11-1
Check [Yes] if you want to
connect with the listed
SSID. Click [Next] and go to
14-1
.