BRP I-Command Evinrude Etec Series - Information Displays

18
Setting Fuel Tank Size
3. Press and hold the UP button to enter the fuel tank capacity. Use the
DOWN button if necessary to make additional adjustments.
4. Press ENTER to set the tank capacity. Repeat these steps for additional
fuel tanks.
Press the EXIT button twice to return to the tachometer page.
IMPORTANT: For user’s who prefer fuel capacity in LITERS – Enter fuel
capacity in U.S. gallons BEFORE changing units to liters.
Boat Setup is complete. Proceed to Information Displays.
MENU
DOWN
UP
EXIT
PAGES
ENTER

1 Eng / 1 Tank
1 Eng / 2 Tanks
2 Eng / 1 Tank
2 Eng / 2 Tanks
3 Eng / 1 Tank
3 Eng / 3 Tanks

Setting Tank Size
0 gal
Press ENTER
when finished
MENU
DOWN
UP
EXIT
PAGES
ENTER

1 Eng / 1 Tank
1 Eng / 2 Tanks
2 Eng / 1 Tank
2 Eng / 2 Tanks
3 Eng / 1 Tank
3 Eng / 3 Tanks

Setting Tank Size
100 gal
Press ENTER
when finished
3
4