BRP I-Command Evinrude Etec Series - Winterize

76
Winterize
I-Command digital gauges (with software version 1.4.0 or higher) provide a winterize feature for 2008 or
newer V4 and V6 models only.
Engine must be running to use this option. Refer to Outboard Operator's Guide for complete procedure and
Safety Precautions.
1. Press MENU. Use the UP or DOWN buttons and select SYSTEM SETUP.
Press ENTER.
2. Use the UP or DOWN buttons and select BUS DEVICES.
Press ENTER.
3. The gauge will search for devices.
MENU
DOWN
UP
EXIT
PA
GES
ENTER

Eng Warnings
Change Units
Bus Devices
Sleep Mode
Sonar Alarms
Eng/Tank Cfg

MENU
DOWN
UP
EXIT
PA
GES
ENTER

Customize
Pages
Screen
Audio Setup
System Setup

MENU
DOWN
UP
EXIT
PA
GES
ENTER

Eng Warnings
Change Units
Bus Devices
Sleep Mode
Sonar Alarms
Eng/Tank Cfg

Message
Searching
Bus
Devices...
2
1
3