19
Engine Data
The I-Command system can monitor up to three engines. The ENGINE DATA option controls which engine is
monitored. Note: This option will only display in multi-engine set-ups.
1. Press MENU. Use the UP or DOWN buttons and select SYSTEM SETUP.
Press ENTER.
2. Use the UP or DOWN buttons and select ENGINE DATA.
Press ENTER.
3. Use the UP or DOWN buttons to select choose PORT, CENTER, OR STARBOARD engine.
Press ENTER.
Repeat this process to assign each engine to its own gauge.
MENU
DOWN
UP
EXIT
PA
G
ES
ENTER
Customize
Pages
Screen
Audio Setup
System Setup
MENU
DOWN
UP
EXIT
PA
G
ES
ENTER
Engines
Port
Center
Stbd
1
3
MENU
DOWN
UP
EXIT
PA
G
ES
ENTER
Fuel Setup
Engine Data
Speed Range
Press Ranges
Eng Warnings
Change Units
2
To Next Page
Loading...
