BRP I-Command Evinrude Etec Series - Removing Pages

44
Accessing a Locked Page
Locking pages prevents an unauthorized user from changing select gauge settings.
1. Press MENU.
Use UP or DOWN buttons to select SYSTEM SETUP.
2. Select desired page and press ENTER.
3. Enter the gauge PASS CODE.
Use the UP or DOWN buttons to change the active digit.
Use the MENU button to select the next digit.
Press ENTER to submit PASS CODE.
MENU
DOWN
UP
EXIT
PA
GES
ENTER

Customize
Pages
Screen
Audio Setup
System Setup

MENU
DOWN
UP
EXIT
PAGES
ENTER

Fuel Setup
Speed Range
Press Ranges
Eng Warnings
Change Units
Bus Devices

Enter Pass-Code
0 0 0 0
13
MENU
DOWN
UP
EXIT
PA
G
ES
ENTER

Fuel Setup
Speed Range
Press Ranges
Eng Warnings
Change Units
Bus Devices

2