BRP I-Command Evinrude Etec Series - Fuel Management Options

64
Fuel Management
Select Fuel Remaining Source
Perform the following procedure on each gauge. The default setting is FLUID LEV SNSR.
1. Press MENU. Use the UP or DOWN buttons and select SYSTEM SETUP.
Press ENTER.
2. Use the UP or DOWN buttons and select FUEL SETUP.
Press ENTER.
3. Use the UP or DOWN buttons and select FUEL REM SRC.
Press ENTER.
MENU
DOWN
UP
EXIT
PA
G
ES
ENTER

Customize
Pages
Screen
Audio Setup
System Setup

1
MENU
DOWN
UP
EXIT
PAGES
ENTER

Refill Tank
Partial Fill
Eco Speed Src
Fuel Rem Src
Rst Trip Fuel
Rst Seasonal

3
MENU
DOWN
UP
EXIT
PA
GES
ENTER

Fuel Setup
Engine Displayed
Speed Range
Press Ranges
Eng Warnings
Change Units

2