BRP I-Command Evinrude Etec Series - Accessing a Locked Page

42
Lock Pages
Viewing Pass Code
This feature prevents unauthorized users from changing select gauge settings. If you have the PASS CODE,
skip to step 4.
1. Press MENU. Use UP or DOWN buttons to select SYSTEM SETUP. Press ENTER.
2. Select NMEA INFO and press ENTER.
3. The PASS CODE is the last four digits of the SERIAL NUMBER.
For easy reference, write gauge serial number here: ______________
Press EXIT to return to the MENU.
MENU
DOWN
UP
EXIT
PA
GES
ENTER

Customize
Pages
Screen
Audio Setup
System Setup

MENU
DOWN
UP
EXIT
PA
GES
ENTER
NMEA Info
Address: 10
Instance: 0
Serial Number:
6 5 4 3 2 1
NMEA Ver: 1.2.0
Bus Volt: 12.8
1
3
MENU
DOWN
UP
EXIT
PAGES
ENTER

Sonar Alarms
Eng/Tank Cfg
Time Config
Reset Values
Lock Pages
NMEA Info

2