BRP I-Command Evinrude Etec Series - Sonar Alarms

80
Reset Values
RESET VALUES will not clear Engine/Tank configuration or the sensor set-
tings that were previously calibrated or configured.
1. Press MENU.
Use UP or DOWN buttons to select SYSTEM SETUP.
Press ENTER.
2. Use UP or DOWN buttons to select RESET VALUES.
Press ENTER.
MENU
DOWN
UP
EXIT
PA
GES
ENTER

Customize
Pages
Screen
Audio Setup
System Setup

MENU
DOWN
UP
EXIT
PAGES
ENTER

Sonar Alarms
Eng/Tank Cfg
Time Config
Reset Values
Lock Pages
NMEA Info

1
2