BRP I-Command Evinrude Etec Series - Page 62

60
7. Use the UP or DOWN buttons and select the tank.
Press ENTER.
8. The gauge will change the tank setting and return to the BUS DEVICES
list.
Proceed to “Fuel and Fluid Level Sensor Calibration” on page 61.
MENU
DOWN
UP
EXIT
PA
GES
ENTER
Select Tank

Tank 1
Tank 2

7
MENU
DOWN
UP
EXIT
PA
GES
ENTER
Select Tank

Tank 1
Tank 2

Message
Changing
Device
Settings
8