LYNXEYE XE Detector User Manual
DOC-M88-EXX240 V1 – 03.2014 iii
6.5 Changing Detector Settings with State Files .................................................................... 6-33
6.6 0D-Mode ............................................................................................................................... 6-35
6.6.1 Performing Scans in 0-D Mode Using COMMANDER and WIZARD .................................. 6-35
6.6.2 Standard operation .............................................................................................................. 6-35
6.6.3 Aligning the Diffractometer ................................................................................................... 6-38
6.6.4 Setting the diffractometer to Default Values ........................................................................ 6-38
7 Preventive Maintenance and Troubleshooting .............................................. 7-1
7.1 Cleaning the LYNXEYE XE Detector ................................................................................... 7-1
7.2 Troubleshooting .................................................................................................................... 7-2
7.2.1 Display Data in the DIFFRAC.COMMANDER Window has Flatlined or is Nonexistent. ....... 7-2
7.2.2 Locked Coupled Scan Does Not Start/Finish ........................................................................ 7-2
7.2.3 The detector is not Selectable/Active in COMMANDER ....................................................... 7-3
7.2.4 High Background in Scans ..................................................................................................... 7-3
7.2.5 High Kβ-Part in Scans ............................................................................................................ 7-3
7.2.6 Alarm LED Lights Red ........................................................................................................... 7-3
7.2.7 The BIAS LED is not Illuminated. ........................................................................................... 7-3
7.2.8 The Angular Accuracy Peak Position Data is Larger than +0.01° of the Expected Value. .... 7-3
8 References ........................................................................................................ 8-1
9 Assessories and Spare Parts List ................................................................... 9-1
To Next Page
Loading...