User Manual LYNXEYE XE Detector
7-2 DOC-M88-EXX240 V1 – 03.2014
7.2 Troubleshooting
7.2.1 Display Data in the DIFFRAC.COMMANDER Window has Flat-
lined or is Nonexistent.
Check if the motor clock cable is properly installed.
Check if the BIAS button is illuminated.
7.2.2 Locked Coupled Scan Does Not Start/Finish
Alarm LED is red or flag for Short Trigger is activated in TOOLS:
Reset the Detector and wait for reconnection.
To Next Page
Loading...